Why use a rainwater system? The answer is simple – it saves you money. By collecting rainwater from your roofs, filtering it and storing it in tanks, you can use it for all non-potable consumptions – from washing laundry, flushing the toilet, washing your car to watering your gardens and many more.
It helps you save your drinking water and also money from your water provider. Moreover, it can be very useful when water supply becomes limited or restricted. Finally, it can be your way to go greener. If you are thinking of installing rainwater tanks in your properties, a professional plumber has the right option for your needs. They have developed a wide range of systems, easy to use, install and maintain. When space and access is restricted, they will offer you simple and affordable solutions, including above and below ground installations. Plumbing professionals provide all the information you need for rainwater collection.
How do you connect rainwater tanks?
Linking Tanks to Fill Evenly. To link tanks together so that they both evenly fill is accomplished by linking the tanks together near the bottom at their sides with piping. As your first tank fills up and water reaches the height of your link , rainwater will flow into your second tank until it attains the same height.
How do rainwater tanks work?
Rainwater tanks work by storing rain when it falls. By reconfiguring your guttering system, instead of rainwater going into the waterways you can instead store it on your property. This water can then be used to water your garden, to flush your toilet or in your laundry.
How do you plumb two water tanks together?
Connecting tanks together at the bottom with pipes from one tank to the next will allow all your water tanks to fill evenly. As rainwater enters your first tank , and reaches the height of your pipe link, rainwater will flow into your second tank until it attains the same height.
What happens when rainwater tank is empty?
A mains switch detects the water level in your tank and if the tank is low, empty or if your pump has stopped it will switch to the mains drinking water supply.
Do rainwater tanks need a pump?
A rainwater tank pump is needed when you want to use to use your rainwater tank water for your home and garden. The water pump pumps the water out of your rainwater tank providing you with pressurised water flow for your house and garden taps.You might be interested: Pic number victoria plumbing
Do it yourself rainwater tank install?
Install a rainwater tank CHOOSE YOUR TANK . First, figure out what size tank you’ll need to harvest rainwater from your roof. PICK A SPOT. The best place is near a primary downpipe, on the lower side of your house, to allow gravity to direct the rain in the gutters to the tank . LAY THE SLAB. CONNECT THE PIPES.
What are the disadvantages of rainwater?
Disadvantages of Rainwater Harvesting Unpredictable Rainfall. Rainfall is hard to predict, and sometimes little, or no rainfall can limit the supply of rainwater . Initial High Cost. Regular Maintenance. Certain Roof Types may Seep Chemicals or Animal Droppings. Storage Limits.
How do I switch from mains to rainwater?
A rainwater to mains water switch can be either automatic or manual: An automatic switching device detects when rainwater is low then switches to mains water. A manual switching device requires you to go outside to your tank and manually open/close the tank and the mains valve.
Are rainwater tanks worth it?
Long term savings A properly looked after and maintained rainwater tank can last upward of 20 years – in fact some of the first squatter tanks we installed are still standing to this day – and over that time can provide significant savings on your water bills.
Can you have 2 water heaters?
” Both heaters are used equally. Disadvantage from series: both heaters must run unless you install shut off on hot water line isolating one of the two heaters . Uses both heaters equally, but requires both heaters to operate, and cannot add timer to one heater .You might be interested: Residential plumbing
How do you plumb in a water storage tank?
How to Install a Water Storage Tank Step 1: Prepare a Base for Your New Tank . As with most home improvement projects, getting a strong foundation is most important. Step 2: Pour Your Concrete Foundation. Step 3: Install the Overflow Drainage Pipe . Step 4: Install Fill Pipes From the Roof.
Do rainwater tanks need cleaning?
It is recommended you clean your tank at the end of summer when water levels are at their lowest. Make sure you turn your power off when doing it yourself if you have an electric pump (also pull plug as electricity can still flow).
How long do rainwater tanks last?
20 years